|
COOLING,
DESICCATING AND COMPRESSED AIR PURIFYING EQUIPMENT
Adsorption
plants of heat and heatless type
Complete plants of type
ÓÎÂ and air dryers of type ÎÂÁ serve for desiccation and purification
of compressed air used for feeding pneumatic and pneumohydraulic
automatic devices in machines, plants and systems, and also for
technological purposes of the industry from dust and oil vapour.
The following plants are produced: - heat type (adsorption plants
with regeneration of adsorbent by heating, of capacity from 5 to
160 m³/min, dew point is minus 40 and 65 °C); - heatless type (adsorpion
plants operating by method of short-cyclic heatless adsorption (PSA),
of capacity from 0.25 to 8.0 m³/min, dew point is minus 40 and 50
°C).
Refrigerating
machines for desiccation of compressed air
Refrigerating machines
are intended for technologies requiring desiccated air of a dew
point up to 20°C. Air desiccation by refrigerating machines is an
economical way and it is used in those cases when low degree of
desiccation and conservation of gas phase, oil in compressed air
required. It is highly important for piston and rotation pneumatic
mechanisms. Refrigerating machines of various types are produced
capacity from 200 to 15,000 m³/hr. All refrigerating machines work
on ozone-proof refrigerating agent R22.
Heat
exchangers-coolers of type ÒÀ, TAK, ÒÝÐÀ
Heat exchangers with
aluminium rib heating element is intended for cooling of compressed
air and condensate tap after compressors. They are differentiated
by smaller dimensions, low value and possibility of fast access
to heating element for service and repair.
Filter
moisture-oil sifters of type ÔÂÌÎ
Filter moisture-oil
sifter is intended for deep purification from dripping and aerosol
particles of moisture and oil (0.98-0.99) and simultaneously purification
from mechanical contamination’s no harder than 4 class by the State
Standard 17433-80. The purpose is desiccation and purification of
compressed air (gas) from dripping moisture, oil and wastes, where
the separation of steam phase of moisture and oil, which can be
separated only by further cooling and adsorbtion, is not required.
Air
desiccation plant for feeding pneumatic systems of drilling rigs
ÓÂ10ÌÂ2Ì
is
intended for producing clean desiccated air for regeneration (a
capacity of 360 m³/hr, a dew point of desiccated air of minus 40°C,
power consumption is no more than 14 kW) under independent conditions
with independent feed of air.
Filters
moisture sifters of type ÔÂÎÂ
Filters moisture sifters
ÔÂÎÂ of air type 1 (centrifugal action without filtering element)
under ÃÎÑÒ 17437-81. Filters moisture sifters ÔÂÎÂ are intended
for compressed air purifying from condenced moisture and mineral
oil.
The
equipment of compressed air desiccation has been certified by the
Russian State Standard System of Certification ( ÃÎÑÒ Ð)
|
